FREE UK (Mainland) Deliveries for orders over £125. Orders usually ships within 24 hours (subject to stock availability)

All Products

Sort by:
100 Litre Mini Waterbutt Kit

Waterbutt

£30.23 (incl. VAT)
Straight Plc 100 Litre Mini Waterbutt Kit

Straight Plc 100 Litre Mini Waterbutt Kit

£30.23 (incl. VAT)

Purpose: At just 380mm (15”) wide the 100 litre capacity Mini Rainsaver will fit into even the smallest space and is perfect for positioning on a patio or in a garden. Manufactured from at least 75% recycled content with a 5 year guarantee. The Water Butt comes as kits complete with Water Butt supplied with a hose-connector tap, with a pre-drill...


More Info
15 Litre Black Plastic Bucket

Tools

£1.63 (incl. VAT)
Silverline 15 Litre Black Plastic Bucket

Silverline 15 Litre Black Plastic Bucket

£1.63 (incl. VAT)

Purpose: 15 Litre Capacity Black Plastic Bucket Fitting Tips: N/a Available in Colours: N/a Range of uses: N/a


More Info
1m Storm Drain Channel Drain

Channel Drain

£7.09 (incl. VAT)
Flexseal Storm 1m Drain Channel Drain

Flexseal 1m Storm Drain Channel Drain

£7.09 (incl. VAT)

Purpose: 1m section of heavy grade plastic channel and grate. The durability & high performance ensures a long lasting, permanent solution for the removal of standing surface water. 3 bottom outlets in every channel and no clips or screws required to assemble Fitting Tips: 1. Dig a trench deep enough to allow for a 2” bed of sand and wide en...


More Info
200 Litre Garden Lake Waterbutt Kit

Waterbutt

£43.33 (incl. VAT)
Straight Plc 200 Litre Garden Lake Waterbutt Kit

Straight Plc 200 Litre Garden Lake Waterbutt Kit

£43.33 (incl. VAT)

Purpose: Attractive wood grain effect tapered shaped water butt available in the standard 200 litre capacity. Manufactured from at least 75% recycled content with a 5 year guarantee. The Water Butt comes as kits complete with Water Butt supplied with a hose-connector tap, with a pre-drilled fitting, Stand and Rain Diverter. Added benefit of a c...


More Info
30mm Cladding Pins Box (Approx 250)

Cladding Pins

£3.85 (incl. VAT)
Bright Nails 30mm Cladding Pins Box (Approx 250)

Brightnails 30mm Cladding Pins Box (Approx 250)

£3.85 (incl. VAT)

Purpose: Clad pins and nails are a unique range of self masking fasteners specially developed for use on all exposed fixing areas particularly UPVC and other maintenance free profiles. Specially designed annular rings on the A4 stainless steel shank provide the gripping characteristics of conventional wood screws but corrosion resistant and main...


More Info
320 mm Inspection Cover - Manhole Base

Inspection Chamber

£12.32 (incl. VAT)
Polydrain 320 mm Inspection Cover - Manhole Base

Polydrain 320 mm Inspection Cover - Manhole Base

£12.32 (incl. VAT)

Purpose: This base has the option to have up to 5 inlets with 3 blanking plugs included to blank off unwanted inlets. The maximum permitted depth that the base can be fitted is 600mm (base and 3 risers). Fitting Tips: 320 mm Inspection Chambers can be used as an alternative to traditional manholes for depths up to 600 mm. Depths of less than 600...


More Info
320 mm Inspection Cover - Riser

Inspection Chamber

£5.54 (incl. VAT)
Polydrain 320 mm Inspection Cover - Riser

Polydrain 320 mm Inspection Cover - Riser

£5.54 (incl. VAT)

Purpose: Used when a shallow access chamber has to be installed so that the top is below ground level. The riser can be cut to length and fits into the top of the shallow access chamber rising to ground level to terminate with a cover and frame. Fitting Tips: 320 mm Inspection Chambers can be used as an alternative to traditional manholes for de...


More Info
320 mm Inspection Cover - Round Cover & Frame

Inspection Chamber

£12.32 (incl. VAT)
Polydrain 320 mm Inspection Cover - Round Cover & Frame

Polydrain 320 mm Inspection Cover - Round Cover & Frame

£12.32 (incl. VAT)

Purpose: Sits on the top of the 320mm diameter access chambers or side riser. For use in non-vehicular traffic areas only. Fitting Tips: 320 mm Inspection Chambers can be used as an alternative to traditional manholes for depths up to 600 mm. Depths of less than 600 mm can be achieved by cutting the chamber riser using a hard tipped handsaw. Ava...


More Info
450 mm Inspection Cover - Manhole Base

Inspection Chamber

£20.54 (incl. VAT)
Polydrain 450 mm Inspection Cover - Manhole Base

Polydrain 450 mm Inspection Cover - Manhole Base

£20.54 (incl. VAT)

Purpose: This manhole base has the option of up to 5 inlets with 3 blanking plugs included to blank off unwanted inlets. Fitting Tips: Depths of less than 1.2 metres can be achieved by cutting the riser between the ribbed sections. The riser is connected to a separate chamber base with a push fit joint, fitted with a ring seal. If another riser ...


More Info
450 mm Inspection Cover - Riser

Inspection Chamber

£10.27 (incl. VAT)
Polydrain 450 mm Inspection Cover - Riser

Polydrain 450 mm Inspection Cover - Riser

£10.27 (incl. VAT)

Purpose: Used when a 450 mm diameter chamber has to be installed so that the top is below ground level. The riser can be cut to length and fits into the top of the chamber rising to ground level to terminate with a cover and frame. Fitting Tips: Depths of less than 1.2 metres can be achieved by cutting the riser between the ribbed sections. The ...


More Info
450 mm Inspection Cover - Round Cover & Frame

Inspection Chamber

From £16.44 (incl. VAT)
Polydrain 450 mm Inspection Cover - Round Cover & Frame

Polydrain 450 mm Inspection Cover - Round Cover & Frame

£16.44 (incl. VAT)

Purpose: Sits on top of the 450 mm chamber or riser. Fitting Tips: Depths of less than 1.2 metres can be achieved by cutting the riser between the ribbed sections. The riser is connected to a separate chamber base with a push fit joint, fitted with a ring seal. If another riser section is used, it can be joined to the one below using the same me...

Loading
Size

More Info
450 mm Inspection Cover - Sealing Ring

Inspection Chamber

£1.09 (incl. VAT)
Polydrain 450 mm Inspection Cover - Sealing Ring

Polydrain 450 mm Inspection Cover - Sealing Ring

£1.09 (incl. VAT)

Purpose: Used to seal the joint between the 450 mm chamber and side riser, also any additional side risers. Fitting Tips: Depths of less than 1.2 metres can be achieved by cutting the riser between the ribbed sections. The riser is connected to a separate chamber base with a push fit joint, fitted with a ring seal. If another riser section is us...


More Info