FREE UK (Mainland) Deliveries for orders over £125. Orders usually ships within 24 hours (subject to stock availability)
Hunter Plastic Soil

Hunter Plastics 110mm Soil System are offered as either Solvent (specifically designed for jointing with Hunter solvent cement) or Pushfit (Dependable rubber seals, retained by snap caps, gives the convenience of push-fit installation).

Hunter Plastic Soil

Sort by:
Hunter UPVC 110 mm Soil Access Cap (SOLVENT Socket Tail)

Hunter UPVC 110 mm Soil Access Cap (SOLVENT Socket Tail)

£10.78 (incl. VAT)

Purpose: Socket tail access cap. Solvent welded to any plain length of pipe to allow for pipe cleaning or inspection. Fitting Tips: To avoid dislodging or damaging rubber seals, always ensure pipe ends are chamfered and lubricated. For Pushfit joints, allow 10mm gap between pipe and end of socket for expansion purposes. For solvent joints, apply...

Colour
Black
Grey
Size

More Info
UPVC 110 mm Soil Access Cap (Spigot Tail)

Access

£10.78 (incl. VAT)
Hunter UPVC 110 mm Soil Access Cap (Spigot Tail)

Hunter UPVC 110 mm Soil Access Cap (Spigot Tail)

£10.78 (incl. VAT)

Purpose: Spigot Tail Access Plug. Fitted to any ring seal socket to allow for pipe cleaning or inspection. Fitting Tips: To avoid dislodging or damaging rubber seals, always ensure pipe ends are chamfered and lubricated. For Pushfit joints, allow 10mm gap between pipe and end of socket for expansion purposes. For solvent joints, apply a liberal ...

Colour
Black
Grey
White
Size

More Info
Hunter UPVC 110 mm Soil Access Pipe (PUSHFIT Single Socketed)

Hunter UPVC 110 mm Soil Access Pipe (PUSHFIT Single Socketed)

£23.09 (incl. VAT)

Purpose: Comes with 3 boss shoulders to connect 32mm, 40mm or 50mm waste pipe (requires boss adaptors). Built-in screwed access cap for inspection/pipe cleaning. Comes socketed at one-end only with the other end to fit into another socket, i.e. another pipe, fitting or connector. Fitting Tips: Push onto the top pipe and whilst holding in positio...

Colour
Black
Grey
Size

More Info
UPVC 110 mm Soil Vent Cowl (SOLVENT Socket Tail)

Ventilation

£3.07 (incl. VAT)
Hunter UPVC 110 mm Soil Vent Cowl (SOLVENT Socket Tail)

Hunter UPVC 110 mm Soil Vent Cowl (SOLVENT Socket Tail)

£3.07 (incl. VAT)

Purpose: Vent terminal is solvent welded to the top of the stack Fitting Tips: To avoid dislodging or damaging rubber seals, always ensure pipe ends are chamfered and lubricated. For Pushfit joints, allow 10mm gap between pipe and end of socket for expansion purposes. For solvent joints, apply a liberal coat of Hunter Solvent Cement to both surf...

Colour
Black
Grey
White
Size

More Info
UPVC 110 mm Soil Weathering Collar (SOLVENT)

Ventilation

£4.12 (incl. VAT)
Hunter UPVC 110 mm Soil Weathering Collar (SOLVENT)

Hunter UPVC 110 mm Soil Weathering Collar (SOLVENT)

£4.12 (incl. VAT)

Purpose: Placed over the stack and solvent welded into position directly above the weathering slate. Fitting Tips: To avoid dislodging or damaging rubber seals, always ensure pipe ends are chamfered and lubricated. For Pushfit joints, allow 10mm gap between pipe and end of socket for expansion purposes. For solvent joints, apply a liberal coat o...

Colour
Black
Grey
White
Size

More Info
UPVC 110 mm Soil Extract Cover

Ventilation

£24.16 (incl. VAT)
Hunter UPVC 110 mm Soil Extract Cover

Hunter UPVC 110 mm Soil Extract Cover

£24.16 (incl. VAT)

Purpose: Extract cover is solvent welded to the top of the stack Fitting Tips: To avoid dislodging or damaging rubber seals, always ensure pipe ends are chamfered and lubricated. For Pushfit joints, allow 10mm gap between pipe and end of socket for expansion purposes. For solvent joints, apply a liberal coat of Hunter Solvent Cement to both surf...

Colour
Black
Grey
White
Size

More Info
UPVC 110 mm Soil Air Admittance Valve (SOLVENT)

Ventilation

£27.07 (incl. VAT)
Hunter UPVC 110 mm Soil Air Admittance Valve (SOLVENT)

Hunter UPVC 110 mm Soil Air Admittance Valve (SOLVENT)

£27.07 (incl. VAT)

Purpose: For use in above ground drainage systems to prevent release of foul air and to admit air under conditions of reduced pressure arising from water flow in the discharge pipes and stack. No need to penetrate the roof structure and no need for additional venting pipes. Fitting Tips: Solvent welded in a vertical position to the top of the in...


More Info