FREE UK (Mainland) Deliveries for orders over £125. Orders usually ships within 24 hours (subject to stock availability)

Products by Polydrain

Sort by:
1m Storm Drain Channel Drain

Channel Drain

£7.09 (incl. VAT)
Flexseal Storm 1m Drain Channel Drain

Flexseal 1m Storm Drain Channel Drain

£7.09 (incl. VAT)

Purpose: 1m section of heavy grade plastic channel and grate. The durability & high performance ensures a long lasting, permanent solution for the removal of standing surface water. 3 bottom outlets in every channel and no clips or screws required to assemble Fitting Tips: 1. Dig a trench deep enough to allow for a 2” bed of sand and wide en...


More Info
320 mm Inspection Cover - Manhole Base

Inspection Chamber

£12.32 (incl. VAT)
Polydrain 320 mm Inspection Cover - Manhole Base

Polydrain 320 mm Inspection Cover - Manhole Base

£12.32 (incl. VAT)

Purpose: This base has the option to have up to 5 inlets with 3 blanking plugs included to blank off unwanted inlets. The maximum permitted depth that the base can be fitted is 600mm (base and 3 risers). Fitting Tips: 320 mm Inspection Chambers can be used as an alternative to traditional manholes for depths up to 600 mm. Depths of less than 600...


More Info
320 mm Inspection Cover - Riser

Inspection Chamber

£5.54 (incl. VAT)
Polydrain 320 mm Inspection Cover - Riser

Polydrain 320 mm Inspection Cover - Riser

£5.54 (incl. VAT)

Purpose: Used when a shallow access chamber has to be installed so that the top is below ground level. The riser can be cut to length and fits into the top of the shallow access chamber rising to ground level to terminate with a cover and frame. Fitting Tips: 320 mm Inspection Chambers can be used as an alternative to traditional manholes for de...


More Info
320 mm Inspection Cover - Round Cover & Frame

Inspection Chamber

£12.32 (incl. VAT)
Polydrain 320 mm Inspection Cover - Round Cover & Frame

Polydrain 320 mm Inspection Cover - Round Cover & Frame

£12.32 (incl. VAT)

Purpose: Sits on the top of the 320mm diameter access chambers or side riser. For use in non-vehicular traffic areas only. Fitting Tips: 320 mm Inspection Chambers can be used as an alternative to traditional manholes for depths up to 600 mm. Depths of less than 600 mm can be achieved by cutting the chamber riser using a hard tipped handsaw. Ava...


More Info
450 mm Inspection Cover - Manhole Base

Inspection Chamber

£20.54 (incl. VAT)
Polydrain 450 mm Inspection Cover - Manhole Base

Polydrain 450 mm Inspection Cover - Manhole Base

£20.54 (incl. VAT)

Purpose: This manhole base has the option of up to 5 inlets with 3 blanking plugs included to blank off unwanted inlets. Fitting Tips: Depths of less than 1.2 metres can be achieved by cutting the riser between the ribbed sections. The riser is connected to a separate chamber base with a push fit joint, fitted with a ring seal. If another riser ...


More Info
450 mm Inspection Cover - Riser

Inspection Chamber

£10.27 (incl. VAT)
Polydrain 450 mm Inspection Cover - Riser

Polydrain 450 mm Inspection Cover - Riser

£10.27 (incl. VAT)

Purpose: Used when a 450 mm diameter chamber has to be installed so that the top is below ground level. The riser can be cut to length and fits into the top of the chamber rising to ground level to terminate with a cover and frame. Fitting Tips: Depths of less than 1.2 metres can be achieved by cutting the riser between the ribbed sections. The ...


More Info
450 mm Inspection Cover - Round Cover & Frame

Inspection Chamber

From £16.44 (incl. VAT)
Polydrain 450 mm Inspection Cover - Round Cover & Frame

Polydrain 450 mm Inspection Cover - Round Cover & Frame

£16.44 (incl. VAT)

Purpose: Sits on top of the 450 mm chamber or riser. Fitting Tips: Depths of less than 1.2 metres can be achieved by cutting the riser between the ribbed sections. The riser is connected to a separate chamber base with a push fit joint, fitted with a ring seal. If another riser section is used, it can be joined to the one below using the same me...

Loading
Size

More Info
450 mm Inspection Cover - Sealing Ring

Inspection Chamber

£1.09 (incl. VAT)
Polydrain 450 mm Inspection Cover - Sealing Ring

Polydrain 450 mm Inspection Cover - Sealing Ring

£1.09 (incl. VAT)

Purpose: Used to seal the joint between the 450 mm chamber and side riser, also any additional side risers. Fitting Tips: Depths of less than 1.2 metres can be achieved by cutting the riser between the ribbed sections. The riser is connected to a separate chamber base with a push fit joint, fitted with a ring seal. If another riser section is us...


More Info
Storm Drain Channel Drain Endcap

Channel Drain

£3.10 (incl. VAT)
Flexseal Storm Drain Channel Drain Endcap

Flexseal Storm Drain Channel Drain Endcap

£3.10 (incl. VAT)

Purpose: End Caps easily and securely slide into StormDrain. Fitting Tips: Remove grates to access End Cap and End Outlet, slide the End Outlet into the slot of one channel, using the tabs position the End Cap in another channel and hold with tape, replace grates. Available in Colours: Black Range of uses: For use on the Fernco Storm Drain Chann...


More Info